Troubleshooting Guide

Pump 1 - Removal and Replacement Procedure

Step 2 - Open the access panel to the spa pack.

Click here to download an electronic copy of this entire procedure.

CAUTION: This panel weighs at least 10 pounds and will fall down to the ground as the bottom screws are removed. Keep your feet clear of the bottom of the panel and be prepared for this to happen.

Behind trim buttons there are eight #2 Phillips screws holding this panel on: 3 on the left trim piece, 3 on the right trim piece, and 2 on the bottom. Remove the trim pieces and then the bottom screws. As you remove the bottom screws, this panel will fall. Lift the panel out of the way and store all parts in a safe place.

Notes:

· Some spas do not use trim buttons to cover the screws.

· For spas with stereos, also remove the panel to the right of the one just removed.

TIP: It is safest to have two people remove these panels: one holding the panel in place while the other takes out the screws.