Troubleshooting Guide

Plumbing - Removal and Replacement Procedure

Plumbing R&R - 1

Tools required: #2 Phillips screwdriver, 1/8" slotted screwdriver, 5/16" slotted screwdriver, 7/16" wrench,

pliers, 6" diagonal cutters, garden hose, hack saw, tape measure, utility knife

 

Materials required: sand paper, clean rags, PVC glue (Rigid-Rigid), PVC glue (Rigid-Flex), Primer

Return to TS Guide

R&R Procedures

 

Air Control Valve

Blower

Filter

Filter Cycle Settings

Hand Rail

Heater

Hose Clamps

Jet Bodies

Jets

Junction Box

Light Bulb

Manifold

Ozonator (O3)

O3 Check Valve

O3 Diverter Valve

Panels

Plumbing

Pump 1

Pump 2

Spa Pack

Speakers

Stereo

Stereo Antenna

Stereo Power Supply

Topside Control

Unions

Waterfall Valve

 

 

Step 1 - Turn off electrical power to the spa by turning off its GFCI breaker.

 

 

Click here to download an electronic copy of this entire procedure.

 

 

WARNING

Before starting any maintenance procedure, always disconnect the electrical power to your spa by turning off its GFCI breaker. Lock this breaker box to make sure that no one can accidentally turn power back on while you are working.

We hope that you have found this guide useful. If you have suggestions on how to make this particular web page better, please email us at tsguide@myspaservices.com.

 

Author: Philip Rastocny