Troubleshooting Guide

Light Bulb - Removal and Replacement Procedure

Light Bulb R&R - 2

Tools required: #2 Phillips screwdriver, 1/8" slotted screwdriver

Return to TS Guide

R&R Procedures

 

Air Control Valve

Blower

Filter

Filter Cycle Settings

Hand Rail

Heater

Hose Clamps

Jet Bodies

Jets

Junction Box

Light Bulb

Manifold

Ozonator (O3)

O3 Check Valve

O3 Diverter Valve

Panels

Plumbing

Pump 1

Pump 2

Spa Pack

Speakers

Stereo

Stereo Antenna

Stereo Power Supply

Topside Control

Unions

Waterfall Valve

 

 

Step 2 - Open the access panel to the spa pack.

 

 

 

Click here to download an electronic copy of this entire procedure.

 

 

CAUTION: This panel weighs at least 10 pounds and will fall down to the ground as the bottom screws are removed. Keep your feet clear of the bottom of the panel and be prepared for this to happen.

 

Behind trim buttons there are eight #2 Phillips screws holding this panel on: 3 on the left trim piece, 3 on the right trim piece, and 2 on the bottom. Remove the trim pieces and then the bottom screws. As you remove the bottom screws, this panel will fall. Lift the panel out of the way and store all parts in a safe place.

 

Notes:

· Some spas do not use trim buttons to cover the screws.

· For spas with stereos, also remove the panel to the right of the one just removed.

 

TIP: It is safest to have two people remove these panels: one holding the panel in place while the other takes out the screws.


We hope that you have found this guide useful. If you have suggestions on how to make this particular web page better, please email us at tsguide@myspaservices.com.

 

Author: Philip Rastocny