Troubleshooting Guide

Jets - Removal and Replacement Procedure

Step 2 - Turn the jet counter-clockwise and remove.

Click here to download an electronic copy of this entire procedure.

Grasp the water jet and rotate counter-clockwise one full turn until you feel it turn freely. Stop turning the jet and pull it out of the jet body.

Note: Only water jets can be removed in this manner. Air-only jets are a one-piece assembly and must be removed from the rear. See jet bodies for more information.

CAUTION: If you do not feel a click after rotating a jet fully counter-clockwise, it is most likely an air-only jet. Do not try to remove an air-only jet as you would a water jet; doing so can permanently damage this jet.