Troubleshooting Guide

 

 

Final inspection - I5

FAQs

0. FAQs:

 

  1. Cabinets

  2. Covers

  3. Dealers

  4. Help

  5. Insulation

  6. Jets

  7. Ozonators

  8. Pre-installation

  9. Set-up

    1. Before adding water

    2. Filling the spa

    3. Testing the electrical system

    4. Programming

    5. Closing up the spa

  11. Shells

  12. Terminology

  13. Water quality

  14. Winterizing

  15. Wiring

 

Before you put the panels back on, take one last look at the plumbing to make sure that there are no leaks. Use a flashlight and check all of the jets and tubing for drips, and the floor for any pooled water. If you find a leak, contact our technical support organization at 727-572-7727.

 

Put your panels back on and add the AquaClara water treatment kit as described in the package.

 

Put the cover on your spa.

 

Congratulations! Once your water has warmed up, your spa will be ready to use. It normally takes about 8-24 hours before the spa is heated to your desired water temperature.

We hope that you have found this guide useful. If you have suggestions on how to make this particular web page better, please email us at tsguide@myspaservices.com.

 

Author: Philip Rastocny